Images for illustration only. See specs for exact details.
Every mounted and balanced Tesla wheel and tire set we ship leaves filled with dry nitrogen, set to your Tesla's spec pressure.
Why nitrogen in Tesla tires
Nitrogen escapes through rubber more slowly than regular compressed air, and it's dry, so pressure swings less as temperatures change. The result is a tire that stays at the right pressure for longer. Everything below follows from that.
What staying at the right pressure does for you
- Range. An underinflated tire has more rolling resistance, and on an EV that comes straight out of your range. Holding pressure helps hold efficiency.
- Safety. Correct pressure means shorter stops, better wet grip, and less heat build-up in the tire.
- Tire life. Tires at spec wear evenly across the tread. Tires that run low wear out their shoulders early.
- Handling. Steering response and stability are tuned around the pressure on your door jamb. Staying there keeps the car feeling the way Tesla set it up.
- Wheel and sensor protection. Dry nitrogen puts far less moisture inside the tire, which is easier on the inside of the wheel and on your TPMS sensors.
What it means on day one
Your set arrives at the right pressure, ready to bolt on. No stop at the air pump.
The honest part
Nitrogen helps your tires hold pressure. It doesn't replace checking it. The benefits above come from staying at spec, so keep an eye on your pressures as you normally would. Topping up with regular air is completely fine and does no harm.
Common questions
Is nitrogen worth it for a Tesla?
As a paid extra at a shop, it's a judgment call. Included with your set at no charge, it's a small upgrade with no downside: steadier pressure through a Canadian winter, and tires that arrive ready to drive on.
Can I top up nitrogen-filled tires with regular air?
Yes. Regular air is already mostly nitrogen, so mixing the two is safe. You'll simply have a little less of the benefit until your next fill.
Will nitrogen affect my Tesla's tire pressure sensors?
No. TPMS sensors read pressure the same way whatever the tire is filled with. Dry nitrogen is, if anything, gentler on them than moist air.
What pressure should my Tesla tires be?
Use the figure on the placard inside your driver's door jamb. It's set for your exact model and trim, and that's the number to check against.
Do I need to find a nitrogen station to keep it up?
No. Check your pressures as usual and top up with whatever is available.
Included, never extra
Nitrogen fill comes with every Mount & Balance Service and every one of our Tesla wheel and tire packages. There's nothing to add to your cart.

Our Guarantee
Every order is matched to your exact vehicle before it ships. If it doesn't fit, we make it right at our cost, including return shipping and restocking.